DoorQuote

Flag conditions that change the work

Quote a replacement door with existing cutouts

A cutout can affect the proposed door construction and the work. State whether you want the feature to stay and describe its position.

Show the feature against the whole door face

Take one view showing the complete leaf and one of the feature on each side if it is easily reachable. Mark its distance from an obvious part of the door such as the bottom or handle edge. Label any approximate dimension as the visible cover or opening you can see. Note a nearby panel, glass trim or raised profile. Say whether the hardware or insert has an identifying model or whether you have its original drawing.

State the intended work for that opening

Explain whether you want to reuse the same part, fit a new one, have it in a different location or remove it from the new door. Ask whether the selected door construction can take the requested feature and what the supplier needs to verify. If a different leaf design will change where it sits, ask to see that position on a drawing. Make clear who is supplying the accessory and what preparation the request includes.

Keep the accessory detail with the door line

Attach the sketch or reference to the request. Confirm how the proposed accessory is oriented from the outside and inside.

Put your request together

Include your measurements if you have them. Say what you want to keep, replace or have fitted.