Door quote and measurement guides
Find out what to measure and photograph, what to ask for in a quote, and which details to check before you agree to the work.
Describe the door and opening
Record the parts of the opening that can change what needs to be supplied or fitted.
Record the opening
- Identify the existing entrance on a door quote
Give an opening a useful label and show the moving door, frame and surrounding pieces so the intended work is easy to identify.
- Slab, frame and rough opening measurements
Label door dimensions by what was measured so an existing slab, outside frame and opening in the wall do not get confused on a quote.
- Record doorway width and height for a quote
Share labelled width and height readings, including differences across the opening and the parts your tape actually touched.
- Show jamb depth and wall thickness in a door request
Tell the person pricing the door how deep the jamb is, which finishes you measured to and where the wall depth may change.
- Sketch the swing and handing for a door quote
Show the hinge side, handle side, direction of movement and viewpoint so the quoted door can be matched to the opening.
- Record hinge and latch cuts for a slab quote
Describe the hinges, lock holes and door edges when asking for a replacement slab that will meet an existing frame and hardware.
- Report door threshold and floor levels
Show the current threshold and both walking surfaces, and explain any planned flooring or landing change that affects the opening.
Describe the door layout
- Preparing a quote for a door with sidelights
Identify each fixed side panel and its relationship to the door, and tell the quote provider which parts should stay or change.
- Ask for a door quote when glass sits above it
Separate the transom above a door from the moving leaf and show whether the upper glass, divider and trim are part of the request.
- What to include in a double-entry-door quote
Show both leaves, the leaf normally used, the meeting edge and hardware so a price request describes the double-door assembly clearly.
- Record an existing patio door layout for a quote
Label moving and fixed patio panels, screen, track and frame, then describe the work you want included around them.
- Quote a porch entry with a second door
Show which porch or storm door is staying and how the two swings, handles and closers relate at the entrance.
- Request a quote for an existing pocket door
Show the pocket door, visible track, finish and wall it slides into, and say which existing parts you hope to keep.
Flag conditions that change the work
- Show the frame condition when requesting a door quote
Point out visible frame wear, movement and covered areas before asking whether to retain the jamb or quote the complete assembly.
- Prepare a door quote for an older opening
Record uneven dimensions and existing trim, glass or hardware worth retaining when asking for a replacement in an older doorway.
- Request a door quote for a below-grade entrance
Show the steps, landing, doorway and visible drainage around a lower entrance before asking for the unit and surrounding work to be quoted.
- Describe the door between the garage and house
Describe both connected spaces, the visible label and any closer, seals or threshold before asking for the exact garage-to-house door scope.
- Describe the passage you need through a door
Report the space available when the door is open, nearby obstructions and the practical use that the quoted assembly needs to suit.
- Quote an entrance door in a shared corridor
Identify the corridor-side finish, hardware and documentation that need to be matched or verified when replacing a shared-hall entrance door.
- Include rain and moisture observations in a door quote
Show where moisture appears near an entry and when it happens so the quote can separate the door and any surrounding investigation.
- Ask for a quote on door glass alone
Show the pane, glazing trim and complete door and make clear whether you want glass, an insert or a whole door assembly priced.
- Quote a replacement door with existing cutouts
Identify a pet flap, mail slot or similar feature you want to retain, replace or omit, and show where it belongs on the leaf.
- Request a door quote for a new wall opening
Share the planned opening, floor and wall finishes, direction of swing and work boundaries when the doorway has yet to be built.
Request and review a quote
Set the scope, prepare attachments and check the assumptions you get back.
Prepare your request
- What to include in a door quote request
Give a door supplier the opening, measurements, requested scope and contact details they need to start pricing.
- How to turn door measurements into quote notes
Write clear labels for existing measurements so a supplier can tell which dimensions describe the door, frame or opening.
- How to request a door estimate before measuring is finished
Ask for a preliminary estimate while clearly labelling the measurements, parts and site conditions that remain unconfirmed.
- How to share door quote photos privately
Choose doorway photos that explain fit and scope while keeping keys, access details and unrelated personal information out of view.
- How to prepare a door measurement visit for a quote
Give the person measuring access to the correct opening and ask which details will be confirmed for pricing or ordering.
- How to include occupied site access in a door quote
Explain who uses the opening, how an installer can get to it and what access must stay available while work is underway.
- How to request itemized pricing for several doors
Use an opening schedule so the supplier can price doors, labour and shared services without losing details for individual rooms.
Choose what to price
- What does a door replacement quote include?
Read the price as separate product, labour and service items so you can see what the estimate covers and what remains open.
- How to request a supply-only door quote
Ask for the exact door and included parts without assuming the quote covers site checks, fitting, delivery or storage.
- How to request fitting for a door you supply
Give the installer the exact door and site details before asking for a price to fit a unit you will purchase separately.
- How to request a door supply and installation quote
Ask for the supplied door and installation work in one proposal while keeping product, labour and finish responsibilities clear.
- How to request pricing to keep your door hardware
Ask the supplier and installer to price retaining selected hinges, handles or locks, and say which parts still need a fit check.
- How to request old door removal and disposal pricing
Ask who will take out, carry away or keep each part of the old door before relying on the replacement price.
- How to request prices for door trim and finishing
Ask for clear prices or scope notes for casing, wall touch-ups and finishing around the door on both sides.
- How to request a base door price and options
Ask for a clearly defined base scope and individually priced alternatives so you can see how additions change the total.
Review and confirm the work
- How to read allowances in a door quote
Find out what an allowance covers and when the actual product, quantity or work can be priced.
- How to ask about hidden conditions in a door quote
Identify what is concealed at the opening and ask how the price will be handled if an inspection finds a different condition.
- How to hand off a door quote to the installer
Pass the correct quote, opening notes and supplied product details to whoever will confirm and carry out the fitting.
- How to ask about door ordering and installation timing
Get separate timing for measurements, order approval, product arrival and the day the opening can be worked on.
- How to request a revised door quote
Ask for a clear replacement quote when the measurements, model or work scope changes after the first estimate.
- What to check in a door quote before you approve it
Confirm the exact opening, supplied unit, service scope and next steps before telling someone to place a door order.
- How to price a door project in phases
Request prices by stage so you can see what can proceed first and what costs change when the work is split.
- How to keep a record of your door quote
Keep the request, the current quote and the decisions about fit, price, access and ordering in one place.
Put your request together
Include your measurements if you have them. Say what you want to keep, replace or have fitted.