DoorQuote

Flag conditions that change the work

Show the frame condition when requesting a door quote

The frame condition helps define the work. Show the visible areas and be clear about what remains behind trim.

Mark the condition around the moving door

Take a wide photo of the complete opening and mark the areas that look worn or different. Show the top corners, hinge positions, latch side and lower jamb where they are visible. Note rubbing, paint breaks or uneven gaps, and whether you have seen a hinge or strike move during ordinary use. If there is damage nearby, show the surrounding trim as well. Leave concealed areas in place and report them as needing a check.

Ask whether the quote assumes the frame can stay

Say whether you prefer to keep the old jamb or want a complete assembly considered. Ask which conditions could change that scope and what will be verified at the opening. If earlier work changed the frame, attach an existing photo or description. A useful reply identifies the existing parts it assumes are sound and the work included if a complete unit is proposed. Keep the interior and exterior trim separate from the frame in your notes.

Share a simple use note

Tell the installer if the door closes and latches in ordinary use. Mention which edge gives trouble and when it started.

Reference: BC Housing: consumer guide to door replacement

Put your request together

Include your measurements if you have them. Say what you want to keep, replace or have fitted.